34
SEAT
ADJUSTMENT
If your seat is not equipped with an adjustment lever
follow this procedure:
1. Loosen the four bolts that hold the seat to the seat
hinge.
2. Move the seat either forward or rearward to get
the correct position on the seat hinge.
3. Tighten the bolts.
MAINTENANCE
1. Clean the seat regularly. Use a special vinyl
cleaner. Do not use a solvent as this will damage the
seat.
2.
Severe heat or cold can damage the seat.
Protection from these conditions is important. Put a
cover on the seat for protection against weather
conditions and water. It is best to put the tractor in a
building when not in use.
3. During operation in severe weather conditions,
you can easily damage the seat. Be careful not to
damage the seat when you get on and off the trac-
tor.
4. If the seat gets a small tear, apply a vinyl repair
tape over the damaged area. Black vinyl repair tape
can be purchased locally.
TRANSAXLE
Change the oil in the transmission after each 500
HOURS of operation.
The oil drain plug is located on the right hand side of
the transaxle housing.
The oil level check plug is located on the right hand
side of the transaxle housing just above the drain
plug.
The oil fill plug is located on the rear of the transaxle
housing.
AIR TEMPERATURE
OIL TYPE & VISCOSITY
All Temperatures
API Service Class SE or CC
SAE
20W40
or
SAE 80 EP Gear Lube
Capacity One Pint (.5 I).
FIGURE 26
FIGURE 27
FIGURE 25
casecoltingersoll.com
Summary of Contents for 4018
Page 2: ...2 casecoltingersoll com ...
Page 38: ...casecoltingersoll com ...