18
STOPPING PROCEDURE (Operating the Tractor)
1. (4000 series) Slowly move the travel control lever
to the “NEUTRAL” position.
(4200 series) Slowly release the travel pedal to
the fully raised position. Put the direction control
lever in the “NEUTRAL” position.
2. Completely stop the tractor. Actuate the brake
pedal if necessary.
3. Engage the parking brake lock.
4. Pull the throttle lever rearward to the “SLOW”
position.
5. Permit the engine to cool. Run the engine at idle
for several minutes if the work load was severe.
6. Turn the key to the left to the “OFF” position.
NOTE:
Muffler after bang can be prevented by
closing the choke at the same time the key
switch is turned to the “OFF” position. This
action prevents the entry of air into the
muffler as the engine comes to a stop and
therefore prevents combustion within the
muffler.
7. Remove the ignition key.
CAUTION:
Know the controls and
how to stop quickly. READ THE
OWNER’S MANUAL and instructions
furnished with attachments.
CAUTION: Take all possible
precautions when leaving the
vehicle unattended, such as
disengaging the power take-off,
lowering the attachment(s), shifting
into neutral, setting the parking
brake, stopping the engine, and
removing the key.
CAUTION: Set parking brake, shut off
engine, remove key and wait until all
engine and attachment motion has
stopped before dismounting from the
operator’s seat.
CAUTION: Disengage power to
attachment(s) when transporting or
not in use.
FIGURE 9
casecoltingersoll.com
Summary of Contents for 4018
Page 2: ...2 casecoltingersoll com ...
Page 38: ...casecoltingersoll com ...
