Ingersoll 4018, Operator'S Manual

Page: 15 / 38

15
13. DIRECTION CONTROL LEVER
TRAVEL CONTROL LEVER
(4000 SERIES)
TO STOP TRAVEL: Put the travel control lever in
the “NEUTRAL” position.
TO START FORWARD TRAVEL: Depress the
travel control lever slightly. Slowly and in small
amounts move the travel control lever forward.
Speed and power will increase as the lever is
moved toward the full forward position.
TO START REVERSE TRAVEL: Depress the
travel control lever slightly. Slowly and in small
amounts move the travel control lever rearward.
Speed and power will increase as the lever is
moved toward the full reverse position.
DO NOT USE FULL SPEED IN REVERSE.
Depress the travel control lever whenever you
change the lever position to have smoother
operation and control.
The travel control lever automatically returns to
the “NEUTRAL” position when the brake is ac-
tuated. You must hold the travel lever in the
needed position to maintain travel while the
brake is actuated.
A neutral start switch is actuated by the travel
control lever. The lever must be in the
“NEUTRAL” position before you can start the
engine.
The right hand dash panel indicator light will
illuminate when the travel control lever is in the
“Neutral” position. The indicator light will go out if
the travel control lever is moved from the
“Neutral” position into either forward or reverse.
DIRECTION CONTROL LEVER
(4200 SERIES)
TO STOP TRAVEL: Slowly release the travel
pedal to the fully raised position. Put the
direction control lever in the “NEUTRAL”
position.
TO START FORWARD TRAVEL: Put the
direction control lever into the “FORWARD”
position. Slowly press the travel pedal down
with your right foot.
Speed and power will increase as the travel
pedal is pressed down.
IMPORTANT: The travel pedal must be fully
raised and the tractor must come to a complete
stop before you move the direction control lever
between “FORWARD” and “REVERSE”
TO START REVERSE TRAVEL: Put the
direction control into the “REVERSE” position.
Slowly press the travel pedal down with your
right foot.
Speed and power will increase as the travel
pedal is pressed down.
DO NOT USE FULL SPEED IN REVERSE.
A neutral start switch is actuated by the
direction control lever. The lever must be in
the “NEUTRAL” position before you can start
the engine.
The right hand dash panel indicator light will
illuminate when the travel control lever is in
the “NEUTRAL” position. The indicator light
will go out if the travel control lever is moved
from the “NEUTRAL” position into either
forward or reverse.
FIGURE 6 TRAVEL CONTROL LEVER FIGURE 7 TRAVEL CONTROL LEVER
FIGURE 8 DIRECTION CONTROL LEVER
casecoltingersoll.com