HandPunch 2000 Manual
29
Service Menu
The Service menu commands provide information that help you determine if the
HandPunch is performing within normal operating parameters and identify the status
of the unit’s inputs and outputs. The following section provides a brief summary of the
Service Menu commands.
There are no user serviceable parts inside the HandPunch.
Enter the appropriate password to enter the Service command menu. Once you have
entered the command menu, there are three options available for navigating the
command menu system.
•
Press
#
to enter the command shown on the display.
•
Press
*
to step to the next command in the menu.
•
Press
CLEAR
to exit the command menu (pressing any numeric key also exits the
command menu). If you are in a command’s sub-menu, press
CLEAR
multiple times to
completely exit the command menu.
There are two commands available from the Service command menu.
•
Calibrate
•
Status Display
Refer to Table 4 and identify the command you need to perform. Step through all previous
commands until you reach the desired command.
Table 4: Service Command Menu
Service Menu
Password = 1
Calibrate
Recal (Y/N)
Status Display
On/Off (Y/N)
NOTE
Navigating
the Service
Command
Menu
Service
Commands
