![Ingersoll-Rand MHP825WCAT Operation & Maintenance Manual Download Page 101](http://html1.mh-extra.com/html/ingersoll-rand/mhp825wcat/mhp825wcat_operation-and-maintenance-manual_2059153101.webp)
Options
Operation & Maintenance Manual
99
Verify the part number of new element vs. old element, as the two IQ filters are of
different media.
Safety
CAUTION
!
The compressor regulation system is adjusted to maintain regulated
pressure at the separator tank. DO NOT adjust regulation to provide full
regulation pressure at the service valve when the IQ System is enabled.
This will result in operation at excessive horsepower levels, causing
overheating, reduced engine life, and reduced airend life.
CAUTION
!
Excessively restricted filter elements may cause an increase in the
amount of aerosol water and oil carryover, which could result in damage
to downstream equipment. Normal service intervals should not be
exceeded.
CAUTION
!
Blockage of the condensate will result in flooding of the vessels. If
flooding occurs, excessive condensate may enter the air stream and
could result in damage to downstream equipment.
NOTICE
Do not operate at temperatures less that 2°C (36°F) unless equipped with
low ambient IQ option.
Summary of Contents for MHP825WCAT
