background image

Warranty

Operation & Maintenance Manual

15

Complete the Applicable Blocks

Owner/User Type of Business (check one only)

Selling Distributor

Servicing Distributor

WARRANTY REGISTRATION

Name ____________________

Name ____________________

Owner/User Name__________

Address __________________

Address __________________

Address __________________

City _____________________

City _____________________

City _____________________

County ___________________

County ___________________

County ___________________

State ____________________

State ____________________

State ____________________

Zip code__________________

Zip code__________________

Zip code__________________

Telephone ________________

Telephone ________________

Telephone ________________

Construction-Heavy
(highway, excavation, etc.)

Asphalt Contractor

Coal Mining

Other Mining

Construction-Light
(carpentry, plumbing, 
pools, mason, etc.)

Government
(municipal, state, county, etc.)

Quarry

Shallow Oil & Gas

Rental (rental center, 
rental fleet, etc.)

Building Contractor

Water well

Utility Company
(gas, electric, water, etc.)

Industrial
(plant use)

Other
specify __________________

Exploration

Utility Contractor

Model

Unit S/N

Engine S/N

Date delivered

Unit-Hours

Airend S/N

Truck S/N

Truck Engine S/N

SERVICING DISTRIBUTOR/USER ACKNOWLEDGEMENT

1.

The Purchaser has been instructed and/or has read the manual and understands proper
preventative maintenance, general operation and safety precautions.

2.

The warranty and limitation of liability has been reviewed and understood by the owner/user.

3.

In the event that this unit is to be used within a nuclear facility, the owner/user shall notify
Ingersoll-Rand of such use so that Ingersoll-Rand may arrange for appropriate nuclear liability
protection from the owner-licensee of the facility.

4.

Ingersoll-Rand reserves the right to make design changes or modifications of Ingersoll-Rand
products at anytime without incurring any obligation to make similar changes or modifications
on previously sold units.

Summary of Contents for MHP825WCAT














































































































Reviews: