Ingersoll-Rand MHP825WCAT, Operation & Maintenance Manual, Page: 8 / 109

Operation & Maintenance Manual Foreword
6
Foreword
The contents of this manual are considered to be proprietary and confidential to Ingersoll–
Rand and should not be reproduced without the prior written permission of Ingersoll–Rand.
Nothing contained in this document is intended to extend any promise, warranty or
representation, expressed or implied, regarding the Ingersoll-Rand products described herein.
Any such warranties or other terms and conditions of sale of products shall be in accordance
with the standard terms and conditions of sale for such products, which are available upon
request.
This manual contains instructions and technical data to cover all routine operation and
scheduled maintenance tasks by operation and maintenance staff. Major overhauls are
outside the scope of this manual and should be referred to an authorized Ingersoll-Rand
service department.
The design specification of this machine has been certified as complying with EC directives.
As a result:
(a) Any machine modifications are strictly prohibited, and will invalidate EC certification.
(b) This machine may be used in USA/Canada, when configured with components bearing the
appropriate certification. (Where ASME certification is valid).
All components, accessories, pipes and connectors added to the compressed air system
should be:
• of good quality, procured from a reputable manufacturer and, wherever possible, be
of a type approved by Ingersoll-Rand.
• clearly rated for a pressure at least equal to the machine maximum allowable working
pressure.
• compatible with the compressor lubricant/coolant.
• accompanied with instructions for safe installation, operation and maintenance.
Details of approved equipment are available from Ingersoll-Rand Service departments.
The use of repair parts/lubricants/fluids other than those included within the Ingersoll–Rand
approved parts list may create hazardous conditions over which Ingersoll–Rand has no
control. Therefore Ingersoll–Rand cannot be held responsible for equipment in which non–
approved repair parts are installed.
Ingersoll-Rand reserves the right to make changes and improvements to products without
notice and without incurring any obligation to make such changes or add such improvements
to products sold previously.
The intended uses of this machine are outlined below and examples of unapproved usage are
also given, however, Ingersoll-Rand cannot anticipate every application or work situation that
may arise.
If in Doubt, Consult Supervision.