Ingersoll-Rand HP935, Operation And Maintenance Manual

Page: 47 / 61

MACHINE SYSTEMS
45
HP935, VHP750, MHP825, XHP750, XP1060
KEY
BAT Battery
BDS Battery disconnect switch
CO RS232C comms
ECON Engine controller
ES Engine speed
CE Caterpillar electronics ground stud
FT Frequency throttle.
Range = 500Hz Base frequency
10% – 90% pwm, 1350 – 1800 RPM at 24VDC
G2 Flywheel magnetic pickup
POUT1 Engine key switch
POUT2 Solenoid, start/run
POUT3 Low fuel warning beacon
POUT4 Spare
POUT5 Start relay
POUT6 Start compressor
POUT7 Hour meter
POUT8 Solenoid, unloader
PT1 Pressure transducer, separator tank.
0–225 PSIG – 9/235, 9270, 0/300, 12/235
0–225 PSIG – HP935, VHP750, MHP825, XP1060
0–500 PSIG – 21/215, 17/235, XHP750
PT2 Pressure transducer, regulation system 0–100 PSIG
PM Plug, machine ID
RS Relay–spst
RT1 Thermistor, separator tank temperature –30 – 255 F
RT2 Thermistor, airend discharge temperature –30 – 255 F
ESTOP Emergency stop
SC Start compressor
SI Switch inputs
SS Starter solenoid
SW1 IQ filter restriction
SW2 Alert, low fuel
SW3 Low fuel shutdown
SW4 Switch, service air
SW5 Air filter rest (option)
SW6 Switch, airend oil pressure (12PSI N.O.)
SW7 Spare
SW8 Switch, start
SWB Switch batery disconnect
TE Transducer excitation
WCON Wedge controller