Desk Series
900024281 R11 000 05/1016
Copyright© 2016 Ingenico
All rights reserved
20
4_5
Installing SAM (Secure access
module)
CAUTION
Before starting, switch off the terminal by disconnecting the
power supply.
WARNHINWEIS
Bevor Sie beginnen, das Gerät auszuschalten, indem Sie das
Netz.
Perform the following operations:
Open down side trapdoor
Insert the SAM Card into the slot marked (1) or (2). Take care
to ensure that the SAM Card is inserted in the correct manner.
The cut corner must be positioned as indicated on the figure.
Cut corner
Close down side trapdoor
We suggest you to use a piece of adhesive previously
pasted on both sides of the SAM as shown here below for
easy removal
