Ingecon SUN 125 TL U 208 Outdoor, Installation Manual, Page: 25 / 88

ABB2000IKI01 25
Installation manual Ingeteam
3.4. Moving the equipment
Appropriate transport and storage of the unit are the necessary first steps for correct use and operation. Taking the
above section into account and as a preventive measure, Ingeteam recommends the use of transport companies
specialized in the transport of special and/or fragile equipment.
The unit must be protected, during transport and storage, from mechanical knocks, vibrations, water splashes (rain)
and any other product or situation which may damage it or alter its behavior.
Failure to observe these instructions may lead to loss of warranty on the product, for which Ingeteam is not responsible.
When transporting the units it is essential to maintain the unit in the upright position, even if it is being returned to
the factory.
Bear in mind the centre of gravity of the unit whenever it is moved.
1/3
1/3
Front of the unit
Transport using goods vehicles
During transport, units must be kept in an upright position and properly secured in accordance with their weight and
size to avoid tipping and bumps.
Transport using a forklift truck
At least the following requirements should be observed:
1. Place the packaged unit centred with respect to the forks.
2. Try to locate it as close as possible to the connection between the forks and the chassis.
3. Ensure that the forks are perfectly level to avoid overturning the unit.
4. In any case, observe the instructions in the forklift truck’s user manual.
5. If it is transported after having been unpacked, unscrew the base being moving it.