DOCUMENT NO. 920012 REV 2 EFFECTIVE 03-14-18 INFRASCAN CONFIDENTIAL PAGE 20 OF 35
4.
The next screen (Archived Measurement screen, Figure 3-13 is the same as the
Measurement Screen (Figure 3-9) shown at the end of a measurement.
5.
In the Archive List, the way to jump a page forward or backward in the list is to
depress the up or down button for 2 seconds. Upon release it will page up or page
down. It will revert to single step after that, so if you need to jump another page, you
need to repeat the depressing the button for two seconds.
Figure 3-11: Archive Screen Figure 3-12: List of Figure 3-13: Archived
Measurements
Measurement
6.
In order to print a data file to the optional label printer, go to the Archive Screen and
view the data file that you wish to print. Then, select the Print button. It will take
about 10 seconds to transfer the data to the printer and print the label. Printing is
only possible when the Infrascanner is in the Cradle and is connected to power and
the optional label printer.
Downloading Data Files to a Computer: To review the stored data, follow the steps below
1.
All measurements are automatically saved on the Infrascanner. Each measurement
is saved as a text file. The name of each data file is the date and time of that
measurement: “n_yymmdd-hhmmss.txt” (measurement serial number, year, month,
date, hour, minutes and seconds).
2.
Data files can downloaded to a computer by using Windows Mobile Device Center
(embedded in Windows 7 and above) while the Infrascanner is installed in a Cradle
connected via USB to a computer running Windows.
3.
Plug the power supply adapter into a power outlet, then plug the other end into the
Cradle.
