DOCUMENT NO. 920012 REV 2 EFFECTIVE 03-14-18 INFRASCAN CONFIDENTIAL PAGE 32 OF 35
0.1
0.36894
0.36894
7.3785
1.0
1.1667
1.1667
2.3333
10
3.6894
3.6894
7.3785
100
11.667
11.667
23.333
Warning: Medical Electrical Equipment needs special precautions regarding EMC and
needs to be installed and put into service according to the EMC information provided in the
tables above. The system should not be used adjacent to other equipment. If adjacent
use is necessary, the system should be observed to verify normal operation in the
configuration in which it is used.
Caution:
This device has been tested and found to comply with the limits for medical
devices to the IEC 60601-1-2. These limits are designed to provide reasonable protection
against harmful interference in a typical medical installation. However, because of the
proliferation of radio-frequency transmitting equipment and other sources of electrical
noise in healthcare environments (for example, electrosurgical units, cellular phones,
mobile two-way radios, electrical appliances, and high-definition television), it is possible
that high levels of such interference due to close proximity or strength of a source may
result in disruption of performance of this device. This Infrascanner is not designed for use
in environments in which its operation can be disrupted by electromagnetic interference.
Transport and Storage
The Infrascanner should always be transported in the manufacturer provided shock
absorbent transport case. Always allow the Infrascanner to acclimate to ambient
temperatures. If the operating temperatures have been exceeded during storage or
transport, allow the Infrascanner to acclimate to an operating temperature. If the
Infrascanner will not be used for 2 weeks, remove the batteries.
