GP-M45J-CX-01A
4005-CB, 4002-CB Manual
RD: JUN 2008
R.L. 02A
BA
When objects are left under a heater in
operation, such objects will be subject to radiant heat and could be damaged.
The main application of this heater is to provide radiant heat comfort in the outdoors, at pool-
side, spa areas, terraces, patios and work areas, etc.
It is necessary to provide “wind breakers”, against wind and breezes.
8. A SAFE LOCATION FOR THE HEATER:
Caution
:
NOTE : This heater is approved for outdoor use only:
Respect minimum clearances to combustibles as shown in figure 12 below.
Install heater on a levelled, solid and stable surface.
Do not install in an explosive environment. Keep away from areas where gas vapours
are present or inflammable liquids are stored or used.
In case of strong winds, completely shut-off the heater and the gas valve.
In case of very high winds remove reflector dome.
Do not move the heater when it is hot.
Do Not operate the heater when the wheels are extended and exposed.
The clearances to combustibles are established at
points reaching a surface temperature of 160
0
F.
Some materials such as awnings or plastic may
require greater distances.
Respect clearances as shown:
Sides of Reflector:
24 inches
Above Reflector:
18 inches
Below Reflector:
24 inches
Fig. 12
8.1 CLEARANCES TO COMBUSTIBLES
Page 8
24”
24”
18”
24”
