INFRARED CAMERAS SOUND DETECTAI User Manual Download

Page: 54 / 62

SOUND DETECTAI USER MANUAL

8-9-10-2 Remote Update

In case the remote update feature cannot be used, the device can also be

updated using a USB drive.

Contact customer service to receive the latest software upgrade or patch.

Place the software update file provided by customer support in the root

directory of the USB drive (i.e., not in any folder). Do not rename the file.

3. Insert a USB drive into the USB slot of the device. The device should

automatically detect the USB drive and show a prompt.

4. Using the touchscreen, tap Yes to copy the update to the device. Do not

remove the USB drive while the update is being copied.

5. Restart the device to apply the update.

6. Remove the USB drive.

THE UPGRADE PROCESS TAKES ABOUT 15 MINUTES. ENSURE THE DEVICE IS

CHARGED BEFORE UPGRADING. IF THE DEVICE LOSES POWER DURING THE

UPGRADE, THE UPGRADE WILL FAIL AND THE DEVICE MIGHT BE UNUSABLE.

8-9-9 Device Information

Device informations and

the current software version is visible at the bottom of

the main menu.

8-9-10 Device Software Upgrade

The device may periodically need a software upgrade or patch. Users can update

to the latest software version as follows either remotely or by using a USB drive.

8-9-10-1 Remote Update

When connected to the Internet via Wi-Fi, the device will attempt to automatically

download software updates available in the Cloud. If an update has been

downloaded, it will be applied the next time the device is started. The current

software version is visible at the bottom of the main menu.

THE UPGRADE PROCESS TAKES ABOUT 15 MINUTES. ENSURE THE DEVICE IS

CHARGED BEFORE UPGRADING. IF THE DEVICE LOSES POWER DURING THE

UPGRADE, THE UPGRADE WILL FAIL AND THE DEVICE MIGHT BE UNUSABLE.

Summary of Contents for SOUND DETECTAI































































Search results

Summary of Contents for SOUND DETECTAI

Reviews:

Related manuals for SOUND DETECTAI

Brands by name

Popular brands

INFRARED CAMERAS SOUND DETECTAI, User Manual

Search results

Summary of Contents for SOUND DETECTAI

Reviews:

Related manuals for SOUND DETECTAI

Brands by name

Popular brands