INFOSEC M4T User Manual Download Page 48

Page: 48 / 48

INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com

Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - [email protected] – 03 11 AA AA 201 18

8.3.4

SAFETY INSTRUCTIONS REGARDING THE BATTERIES.

• Never short the battery terminals as this involves high risk. It will damage the equipment and the battery.

• Avoid mechanical stress and impacts.

• Do not open or mutilate the battery. Released electrolyte is harmful to the skin and eyes.

• Do not dispose of a battery in a fire. The battery may explode.

• In the event parts of the body come into contact with battery acid, wash immediately with plenty of water

and call the nearest medical service as soon as possible.

• Batteries involve a serious risk for health and the environment. They should be disposed of according to

current laws.

Summary of Contents for M4T

















































Search results

Summary of Contents for M4T

Reviews:

Related manuals for M4T

Brands by name

Popular brands

INFOSEC M4T, User Manual

Search results

Summary of Contents for M4T

Reviews:

Related manuals for M4T

Brands by name

Popular brands