16
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - [email protected] – 03 11 AA AA 201 18
4.2
Equipment Reception.
4.2.1
Unpacking and content checking.
On receiving the device, make sure that it has not suffered any damage during transportation. Otherwise,
make all pertinent claims to your supplier or to our company. Also check that the data on the nameplate,
which is affixed inside the front door (PF), corresponds to those specified in the purchase order, to do this,
you will need to unpack it. In the event of non-conformity please give notification as soon as possible
quoting the device manufacturing number and references of the delivery remittance.
When the device has been accepted, it is best to repack the UPS until it is commissioned in order to protect
it from any knocks, dust, dirt, etc....
The packaging of the device consists of a wooden pallet, a cardboard or wooden surround depending on
the case, expanded polystyrene corner pieces, polyethylene sleeve and band, all recyclable materials; they
should therefore be disposed of according to current regulations. We recommend that the packaging is kept
for future use.
To unpack, cut the bands on the cardboard surround and remove it from above as if it is an cover or
remove it with the necessary tools if the surround is made of wood; remove the corner pieces and the
plastic sleeve. The UPS will be unpacked on the pallet, to lower it suitable equipment must be used with the
required safety equipment; the approximate weights of table 7 and 8 must be considered.
Fig.12.
Front view UPS location
Fig.13.
Top view UPS location.
4.2.2
Storage.
The equipment will be stored in a dry, well-ventilated place and protected against rain, water jets or
chemical agents. It is advisable to keep the equipment and the battery pack(s) in their original package
which has been designed to assure maximum protection during transport and storage.
Except special cases the UPS has sealed airtight, lead-calcium batteries and should not be stored for more
than 12 months (see the date the batteries were last charged on the label affixed to the device packaging
or on the battery cabinet).
After this time, connect the device to the mains along with the battery pack(s), as the case may be. Start it
up as per the instructions given in this manual and charge the batteries for 2 hours from float level.
Summary of Contents for M4T
Page 1: ...User Manual 10 80 kVA ...
