INFOSEC UPS SYSTEM E3 Performance 5000 RT, Manual

Page: 41 / 99

INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 12 18 AA 59 205 19
41
3 . O P E R A T I O N S
3.1 Buttons operation
Button view
Buttons Functions
ON/MUTE button

Turn on the UPS: Press and hold ON/MUTE button for at least
2 seconds to turn on the UPS.

Mute the alarm: When the UPS is turned on in battery mode, press
and hold this button for at least 3 seconds to disable or enable the
alarm system. This is not applied to the situations when warnings or
errors occur.

Up selection key: Press this button to display previous selection in
UPS setting mode.

Switch to UPS battery self-test mode: Press and hold ON/MUTE
buttons for 3 seconds to enter UPS battery self-testing while in AC
mode.
OFF/ENTER button

Turn off the UPS: Press and hold this button at least 2 seconds to turn
off the UPS.

Confirm selection key: Press this button to confirm selection in UPS
setting mode.
SELECT button

Switch LCD message: Press this button to change the LCD message
for input voltage, input frequency, battery voltage, output voltage and
output frequency.

Setting mode: Press and hold this button for 3 seconds to enter UPS
setting mode only when UPS is off.

Down selection key: Press this button to display next selection in UPS
setting mode.
ON/Mute + Select
Button

Exit setting mode or return to the upper menu: When working in
setting mode, press ON/Mute and Select buttons simultaneously for 0.2
seconds to return to the upper menu. If it’s already in top menu, press
these two buttons at the same time to exit the setting mode.
OFF/Enter
Button

Rack or Tower display switch: Press Select and OFF/Enter buttons
simultaneously for 3 seconds. The display change from/to Rack to/from
Tower.
