Infortrend EonStor CS 3016, Installation Manual

Page: 37 / 86

EonStor CS Installation Guide
page 37 / 86
Installation Guide
3-1. Assign the Master Node
Choose any node as the master. And following the below instruction for assigning the node as master node
Note!
Only one node can be designated as the master in a cluster system. When more than one node are set as
the masters, it may cause the deployment to fail or the cluster system to operate abnormally.
1. Choose one of the CS node you want to assign as master node, press its front-
end panel’s
“Mute/Service” button for about 6-8 seconds.
2. Release the button and the Service LED will blink in white light, that means the Master node has been
set up
Press button for 6-8
seconds