InfoPrint 6500 Series, User Manual

Page: 171 / 360

IGP Emulation Menu
171
Define LF Code (Line Feed)
This parameter forces the printer to insert an automatic Carriage Return code
into the data stream whenever a Line Feed code occurs. This can be used in
most installations, but it is required if the host computer does not send
Carriage Returns to the printer.
•
LF = LF (the default). Does not perform an automatic carriage return. The
next print position will be the current print position of the next line.
•
LF = CR + LF . Performs an automatic carriage return. The next print
position will be print position 1 of the next line.
Auto LF
This parameter determines if text will wrap to the next line when the line of
text exceeds the right margin.
•
Disable (the default). Truncates the text beyond the right margin until a
CR or CR + LF is received.
•
Enable . Automatically inserts a CR + LF after a full print line.
IGP SFCC
You can specify which hex code (1-FF) will be used as the Special Function
Control Character (SFCC). The SFCC denotes that the following data is an
IGP command.
•
7E (the default)
•
1 – FF
PI Slew Range
You can specify how many lines the paper will feed.
•
16 (the default). A paper slew of 0-15 will move 1-16 lines.
•
15 . A paper slew of 1-15 will move 1-15 lines. A paper slew of 0 will move
1 line.
CR Edit
This parameter determines if a carriage return will be followed by a line feed.
•
Disable (the default). The printer ignores all carriage returns that are not
followed by line feeds.
•
Enable . The printer processes all carriage returns, even for those that are
not followed by line feeds.
Select Set
•
Disable (the default). Uses the character set selected in the Select Font
menu.
•
UTF-8. Selects the UTF-8 character set (unicode encoded font).