Infopia CLOVER A1c Self, Instructions For Use Manual

Page: 7 / 33

CLOVER A1c Self • 12 •
9. OPERATION
Note: The analyzer will automatically go into
'stand-by' mode after a test.
The cartridge has to be pulled out and
the cover closed.
9.3 Stand-by
08/03/30
HbA1c
AM10:00
Glucose
08/03/30
HbA1c
AM10:01
Glucose
After warming up, the analyzer goes into 'Stand-by' mode. Two different 'Stand-by'
icons will be displayed when glucose module is used.
9.4 Power Save
After 30 minutes in 'stand-by' mode, without any action, the Analyzer goes into 'Power
Save' mode.
To come back to 'Stand-by' mode, press shortly, or just open the cover for
testing.
• Glucose Module Inactive • Glucose Module Active
When the power is connected, the LCD will display 'Warming up' until the device gets
ready for the test.
Warming up will take approximately 5 minutes depending on the ambient temperature
9.2 Warming up
While warming up, the
CLOVER A1c
TM
Self
performs
hardware function test to check internal opticsand the
mechanical system.
CLOVER A1c Self • 13 •
10. SETTING THE ANALYZER
Date
Getting into set up mode
In stand-by mode, press the button and hold for
3 seconds. Choose between set up and memory mode
by pressing or buttons. Then, press
button to select.
Select the date format ('yy/mm/dd' or 'mm/dd/yy' or
'dd/mm/yy') by pressing the or , then press
.
Next, set the date by pressing the or bottens
You may hold the arrow keys to scroll through the
dates faster.
Time
Set up Memory
DATE yy/mm/dd
TIME 12h
08 / 03 / 30
AM 08 : 00
DATE yy/mm/dd
TIME 12h
08 / 03 / 30
AM 08 : 00
Select the time format by pressing the or
buttons, then press .
12h for standard time / 24h for military time