APPENDIX B
INSTALLATION AND PERFORMANCE TESTING CHECKLIST
1. PASSENGER SEATING AREAS
Check the condition of the cockpit unit for fiberglass body damage or deterioration.
Visually inspect the cockpit unit for loose or missing fasteners.
Visually inspect the seat unit for damage, deterioration and security.
Visually inspect for sharp or protruding objects in the passenger areas.
Check the condition of the floor surface and mats.
Inspect the lap belts (primary restraint) and related operating mechanisms for proper
function, damage and the security of mounting fasteners.
Inspect the overhead restraints (secondary restraint) for proper function and
condition.
Inspect the steps and thresholds for damage or tripping hazards.
Check the cockpit door hinges and gas spring cylinders for condition and proper
operation.
Inspect the seat for loose or missing fasteners and appropriate safety wire.
Inspect the cockpit frame for cracks or deformation.
2. Frame and Base
Visually inspect all structural members on the tail boom, A-Frame and the cockpit
attachment point for bent/deformed brackets, cracks or damage in the frame members
or weldments.
Check the frame fasteners for appropriate grade, retaining wire and proper
installation.
Check the counterweight and rail for condition and security.
Check for loose or missing fasteners on the A-Frame and structure.
Visually inspect the anchor points and verify that the A-Frame has not moved.
Check for abnormal wear or contact between structural components.
Visually inspect pivot points and joints for obvious wear.
Check the frame and base for excessive dust buildup and debris.
Inspect the tail boom shroud for security.
Summary of Contents for MaxFlight MT3000B ELECTRIC
