Copyright ©2018, Infoblox, Inc.All right reserved.
SFP/SFP+ Interface
Specifications
RoHS 6 Compliant 1000 BASE-T Copper SFP Transceiver
Infoblox part number: IB-SFP-CO
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Extended case temperature range (0°C to +85°C)
Fully metallic enclosure for low EMI
Low power dissipation (1.05 W typical)
Compact RJ-45 connector assembly
RoHS 6 compliant and Lead Free
Access to physical layer IC via 2-wire serial bus
1000 BASE-T operation in host systems with SGMII interface
RoHS 6 Compliant 2Gb/s 850nm SFP Transceiver
Infoblox part number: IB-SFP-SX
Up to 2.125 Gb/s bi-directional data links
Hot-pluggable DFP footprint
Commercial operating temperature range: 0°C to 70°C
850nm Oxide VCSEL laser transmitter
Duplex LC connect
RoHS 6 Compliant and Lead-Free
Up to 500m on 50/125m MMF,300m on 62.5/125m MMF
Metal enclosure, for lower EMI
Single 3.3V power supply
Low power dissipation
Infoblox SFP+ Long Range 10GbE LR fiber Transceiver
Infoblox part number: IB-SFPPLUS-LR
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.5Gb/s bit rates
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Commercial temperature range -5°C to 70°C
Single 3.3V power supply
Maximum link length of 10km
Uncooled 1310nm DFB laser
Receiver limiting electrical interface
Duplex LC connector
Infoblox SFP+ Short Range 10GbE SR fiber Transceiver
Infoblox part number: IB-SFPPLUS-SR
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.5 Gb/s bit rates
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Commercial temperature range 0°C to 70°C
Single 3.3V power supply
Maximum link length of 300m on 2000 MHz-km MMF
Uncooled 850nm VCSEL laser
Receiver limiting electrical interface
Duplex LC connector
Table 5 SFP/SFP+ Appliance Support Summary
Infoblox
appliance Model
SFP/SFP+
Support
# of active SFP/
SFP+ ports
10GbE
Support
Accelerated 10
GbE Support
HA
Disabled internal
RJ-45 ports
IB-4030
Y
1
4
2
N
N/A
Y
Y
IB-4030-10GE
Y
3
4
2
Y
3
Y
3
Y
Y
1
– 1GbE SFP support only. Uses 1GbE hardware acceleration for DNS query caching applications.
2
– In both models, MGMT and HA ports do not carry DNS query traffic. The LAN1 and LAN2 interfaces are used for DNS query traffic only.
3
– Uses 10GbE hardware acceleration for DNS query caching applications.
System, Environmental, and Power Specifications
System specifications describe the physical characteristics of the appliance. Environmental specifications describe the temperature and moisture
limits it can withstand. Power specifications describe the electrical range within which the appliance circuitry can operate.
System Specifications, IB-4030 and IB-4030-10GE Appliances
Form Factor: 2-U rack-mountable appliance
