Copyright ©2018, Infoblox, Inc.All right reserved.
3. Log in using the default user name and password
and
.
admin
infoblox
Note: User names and passwords are case-sensitive.
4. Read the Infoblox End-User License Agreement and click
to proceed if you agree with the terms and conditions.
I Accept
5. The Setup Wizard opens, and you can enter basic network and deployment settings.
Determine how you want to deploy the appliance, and then use the following worksheets to note the network settings that you want to enter
on the wizard screens.
Use the following worksheet when configuring a single independent appliance or Grid member:
Settings
Enter your information here
Grid Name
Shared Secret Host Name
LAN1 Port IP Address and Netmask
Gateway IP Address
On the last screen of the wizard, click
. The Infoblox GUI application restarts.
Finish
Infoblox CLI
The Infoblox CLI allows you to configure and monitor the appliance using a small set of Infoblox commands. Some tasks, such as resetting the
appliance, can only be done through the CLI. You can access the Infoblox CLI through a direct console connection from your management
system to the Infoblox appliance. (For more information, see
.) You can also enable remote console access — that is, SSHv2
Console Port
(Secure Shell version 2) access— through the Infoblox GUI or CLI, and then access the CLI from a remote location using an SSHv2 client. (For
more information, refer to the
.)
Infoblox NIOS Administrator Guide
Using CLI Help
You can display a list of available CLI commands by typing help at the command prompt.
Infoblox > help
==============================================================================
CommandSummary
==============================================================================
? Display help
delete Delete files
dig Perform a DNS lookup and print the results
exit Exit command interpreter
help Display help
ping Send ICMP ECHO
quit Exit command interpreter
reboot Reboot device
reset Reset system settings
set Set current system settings
show Show current system settings
shutdown Shutdown device
traceroute Route path diagnostic
