background image

NOTES:
 The battery needs around 2.5 hours recharge time with the  fast charger 
included. 

 If the low

 

battery light on the control panel blinks red, the battery must 

 

be immediately charged.

1.First, make sure that the power switch on the unit is set to 'Off'.

2.Plug the charger into the battery recharge socket on the side of the unit, 

then plug the other end into a wall outlet (See Illustration 1). The Power 
Indicating Light on the control panel of the unit will begin flashing blue, 
indicating that the unit is charging.

3.Once the battery is fully charged, the

 

unit

 

will beep twice, and

 

the 

charging light will stop flashing and will be

 

replaced

 

by a steady blue 

light. 

4.If the CleanMate is not in use please switch off the main switch in order 

to protect the battery.

Illustration 1

When the power of the unit  is 
off, plug the adapter into the 
battery recharge socket of the 
CleanMate first, and then plug 
the other end into a wall outlet. 

12

13

Clean Mate 365

QQ-1

Clean Mate 365

Recharging the Battery

Installing Accessories

Side Brush Installation and Removal 

 To remove the Side Brush

,

 use a Philips head screwdriver to remove 

the screw in the center of the Side Brush Assembly

 

by turning it 

counter-clockwise.

 To install the Side Brush, place the Philips head screw through the 

center hole of the Side Brush assembly, and align the screw with the hole 
in the slot for the Side Brush. Attach the screw by turning it in a 
clockwise direction, until the screw is firmly in place.    

Roller Brush Installation and Removal

 Ensure that the power of the CleanMate is 'Off', and turn the 

CleanMate upside down so that the bottom of the unit is facing you.

 Align the slotted end of the roller brush with the slot in the flexible 

insert in the right side of the roller brush compartment (near the side 
brush) and press it

 

into place.

 Push the free end of the roller brush down into the roller brush 

compartment, and align the free end with the brush holder on the left 
side of the compartment. Slide the roller brush to the left to secure it in 
place.
                         

    

   

Caution!  Make sure the power switch of the unit

is turned

                 to OFF before recharging the battery!

CleanMate

CleanMate

wall outlet

Summary of Contents for QQ2 Basic Series














Reviews: