6. Empty the contents of the Dust Bin into a trash can. (Illustration 5)
• Rinse the Dust Bin with water if needed. (Illustration
6)
• Let the Dust Bin completely dry before using it again.
7. Using the provided Hand Brush, brush the debris off the Air Filter.
(Illustration 7)
• The Air Filter can be rinsed clean with water
• Make sure the Air Filter is completely dry before using it again.
8. DO NOT clean the Dust Bin or the Air Filter in a Clothes Washing
Machine or a Dish Washing Machine.
9. While the Dust Bin is removed from its compartment, turn the unit
over, and using the Hand Brush to brush any excess dust that might have
accumulated in the compartment into a trash can.
10. Once the Dust Bin and Air filter are completely dry, put the Air Filter
back in place on the Dust Bin. (Illustration 8) Then put the assembled
Dust Bin and Air Filter back into the Dust Bin compartment, with the air
filter pointed away from the control panel.
11. Put the Dust Bin Cover back in place by first inserting the tabs on the
cover into the slots on the case of the unit, then press down firmly on the
edges of the Dust Bin Cover until the Release Button clicks into place.
(Illustration 10) Make sure the Dust Bin Cover is securely in place
before operating the unit.
Illustration 1
Illustration 2
16
17
QQ-1
Stopping Operation
• Press the Start/Stop button on the control panel of the unit or press the
Stop button on the remote control.
The operation and maintenance of the CleanMate is very simple. To
maintain top performance of the unit
,
it is recommended that you follow a
routine cleaning and maintenance
schedule after each use.
1. Make sure to clean and empty the Dust Bin and to brush off the Air Filter
after every cleaning cycle.
2. Make sure that the vacuum intake is free of any debris and obstacles.
3. Make sure that the bristles of the Side Brush are free and not tangled with
hair, etc.
4. Make sure that there is not hair, strings, etc caught up in the Roller Brush.
5. Remove and clean out the Roller Brush
.
6. Make sure that there is nothing blocking the air ventilation exits on the
top of the unit.
Cleaning Dust Bin and Air Filter
1. Make sure the power of the unit is 'Off'.
2. Press the Dust Bin Open Button. (See Illustration 1)
3. Remove the Dust Bin Cover. (See Illustration 2)
4. Remove the Dust Bin from its compartment by placing your finger(s) in
the groove near the front of the CleanMate, and on the tab at the center of
the air filter. Squeeze to disengage the tab, and then lift the Dust Bin
straight out of its compartment. Illustration 3
5. Remove the Air Filter from the Dust Bin by firmly holding the Dust Bin
in one hand, and pulling the Air Filter straight out by the tabs on the Air
Filter. Illustration 4
Caution! Please do not change the ultraviolet
light tube
yourself.
General Operation
Cleaning and Maintenance
Cleaning Dust Bin and Air Filter
CleanMate
CleanMate
CleanMate
