16
D. Disconnect the wire connector that connects the battery and unit.
E. Put a new battery into battery slot with 2 strip holders face up
F. Reconnect the wire between the battery and unit correctly.
G.Make sure the wire connector is stored on the cavity.
H.Put the battery cover back and make sure side brush is not stuck in.
I. Lock back battery cover with screws.
A. Remove two screws from battery cover with screw driver
C. Take out the battery using the 2 strip holder on its sides
Note: Only use factory authorized batteries
Unit Usage Limitation
The cleaner unit can ONLY be used at residential houses indoor and dry floor. It will clean
the debris,dirt, dust, and pet hairs off the floor, and work well on hardwood, tile, linoleum,
and low-pile (up to 0.5 inches) carpet.
Battery Installation and Replacement
B. Open the battery cover.
