19
Shown in the following Figure:
Figure 7-3
Indicates iris operation.
(1)
means Iris Close. Click it to close the iris to make the
images darker.
(2)
means Iris Open. Click it to open the iris to make the
images brighter.
Indicates zoom operation.
(1)
means zoom out. Click it to zoom out.
(2)
means zoom in. Click it to zoom in.
Indicates focus operation.
(1)
means focus far. Click it to manually adjust the lens focus
on the distant object.
(2)
means focus near. Click it to manually adjust the lens
focus on the near object.
7.3 Camera Control Function
Shown in the following figure:
Figure 7-4
When the mouse moves on the corresponding button, the key will
turn light. Click the button would make it return to former status,
which means it works.
7.3.1 Speed Adjustment
Pan Speed: Adjust pan speed of dome. 8 grades are available: the
greater the number is, the faster the speed is.
Tilt speed: Adjust tilt speed of dome. 8 grades are available: the
greater the number is, the faster the speed is.
7.3.2 Setting Preset and Calling up Preset
Setting Preset
(1)
Enter the preset number in
(1
－
254);
(2)
Deflect the direction key to change the lens location;
(3)
Click
to save the setting;
Calling up Preset
Enter the preset number to be called up in
, and click
in the “Setting preset” area to call up.
7.3.3 Setting Pattern and Calling up Pattern
Setting a Pattern
(1)
Enter the pattern number in
;
(2)
Click
in the “Pattern Area” to start setting a pattern;
(3)
Use the direction button to perform a series of pan, tilt and
zoom operation to finish a navigation course;
(4)
Click
in the “Pattern Area” to save the navigation
course as the pattern;
(5)
Repeat Step 1-4 to set pattern 2.
Calling up a Pattern
(1)
Enter the pattern number in
;
(2)
Click
in the “Pattern Area” to call up pattern. The
domes will automatically repeat the navigation course
recorded before.
7.3.4 Setting Autopan and Calling up Autopan
Setting Autopan
(1)
Click
in the “Autopan area” to start setting a autopan;
(2)
Use the direction button to perform automatically move left
and right between two pre-defined positions when no manual
operation is performed;
(3)
Click
in the “Autopan area” to save the navigation
course as the Autopan.
Calling up Autopan
Click
button in the “Autopan area” to call up autopan. The
domes will automatically repeat the navigation course recorded
before.
Note:
The direction of autopan can be set via menu.
7.3.5 Calling up Autoscan
Click
to call up scanning track of the camera.
7.3.6 Lens Flip 180
°
Click
to auto flip 180
°
.