12
Chapter IV MPEG4 Video and Alarm Settings
When login successfully, the interface will be”MPEG4” (as shown
in figure 3-2 or 3-3).
It can switch to full-screen mode by double clicking the video
window, and exit full-screen mode by double clicking again.
A serial buttons on the left help you to set concerning parameters
such as video setting, motion detection, OSD, audio, stream type,
player and so on.
The system supports dual encoding stream, and it can set video
parameters under Major stream and Minor stream separately. Below,
take the video settings under Major stream as an example.
Common user is just able to set the four items: video size, stream
type, audio and player.
You can hide the menu by using the shortcut button .When the
menu is hidden, you can click to show the menu.
4.1 Video Size
If Resolution is set to 960P or 720P, user can set appropriate video
size in “Video Size” interface. The following figure is the interface
when Resolution is set to 960P.
Figure 4-1
1X: display the original video size.
Scaled 960: video size is 720*540.
4.2 Player
Click “Player” button, and Player setting interface will be shown as
follows:
Figure 4-2
Users can select player to play video:
Infinova Player:
Choose Infinova player to play video.
QuickTime
: Choose QuickTime Player to play video.
Note:
Available merely for the super user.
4.3 Stream Type
Click “Stream Type” button, and Stream Type interface will be
shown as follows:
Figure 4-3
There are two options: Major stream and Minor stream. The
settings to each stream are separate.
4.4 Motion Detection
Click
【
Motion Detection
】
button to display the following
interface regarding motion detection sensitivity:
Figure 4-4
Sensitivity
: set the sensitivity, the value is between 1 and 30.
Recommended setting: 15
Motion detection area 1-4:
Two coordinates determine an area.
The line between those two points is the diagonal of detection area.
Each point extends along 2 lines perpendicular to the X-axis and
Y-axis, and the rectangle formed by those 4 crossed lines is the
motion detection area.
If there is any motion detection alarm in the preset area, the alarm
icon on the webpage will turn red
. If it’s normal, the icon is
grey
.
[ON ]:
Open motion detection alarm.
[OFF]:
Close motion detection alarm.
Note:
If the motion detection alarm is on, you need to wait about 5
seconds for motion detection alarm checking.
4.5 OSD Settings
Click “OSD” button in the navigation bar to display the following
interface: