11
If update successfully, the following information will appear on the
current interface:
Figure 3-35
If the type of updating file is wrong, the following information will
come out:
Figure 3-36
At this time, re-check the updating file and camera system, or
otherwise choose other program to update.
Note:
After update successfully, it needs to restart the system.
3.12.2 Factory Settings
Click “Set” button, the following hint would display:
Figure 3-37
Click “OK”, system starts to reset to the factory default. It takes
about 15 seconds to undertake this process, when finishing, the
figure below would appear:
Figure 3-38
Click “OK” button to close the webpage.
Note:
When factory setting is finished, IP address resumes to
192.168.1.100, while subnet code resumes to 255.255.255.0.
3.12.3 Online Reboot
Click “Reboot”, the system will be automatically re-started. And
after 80 seconds the webpage closes.