6
3.3 Wall Mounting
3.3.1 Specifications for Short-Arm Wall mounting
Below figures demonstrate the installation specifications for
short-arm wall mounting (Unit: mm).
Indoor Mounting:
Figure 3-12 Indoor Short Arm Wall Mounting
Outdoor Mounting:
Figure 3-13 Outdoor Short Arm Wall Mounting
3.3.2 Specifications for Long-Arm Wall Mounting
Below figures demonstrate the installation specifications for
long-arm wall mounting (Unit: mm).
Indoor Mounting:
Figure 3-14 Indoor Long Arm Wall Mounting
Outdoor Mounting:
Figure 3-15 Outdoor Long Arm Wall Mounting
3.3.3 Installation Procedures for Wall Mounting
Note:
When installing the dome (bracket mount), as to the usage of
dustproof sponge and waterproof tape, please refer to
Appendix III
and
Appendix IV
separately.
Easily install your IP dome in below steps:
1.
Install the wall mount at a suitable location.
Figure 3-16 Installing Wall Mount
For dimensional diagram of the mount, please refer to the following
figure (Unit: mm).
Long-Arm Wall Mount
