5
Cable dragged out from the base
2.3 Wall Mount
Wall mount is to fix the PTZ camera on the erect or slanting plane
by means of some specific auxiliary mounting components.
Bracket Dimension:
To mount the PTZ camera:
1.
Fix wall mount brackets on wall or other erect planes tightly
and thread the cable through the brackets;
2.
Connect the cable connector with the base plug and slightly
rotate them for a tight connection.
3.
Mount the PTZ camera to the bracket properly to finish
installation.
Shown as below:
Wall Mount Bracket Structure
2.4 Pole Mount
Pole side mount is to install the PTZ camera to the cylinder via
linkage components. It is necessary to fix a connection board to the
cylinder (recommended diameter: 140mm) via a hoop before
installing. Then, install the wall mount brackets to the connection
board. After it is fastened steadily, just mount the PTZ camera on
the wall bracket to complete the mounting.
Summary of Contents for V1492MR-18TH
Page 30: ...26 ...
