10
Fig. 4-8
After successful update, reboot the system which may take 90
seconds. Count-down interface appears during rebooting, as shown
below:
Fig. 4-9
After rebooting, it goes to a new webpage to perform the new
program.
Factory Settings
V1492MR-T series PTZ camera provides online reset function,
which greatly facilitates reset adjustment.
“Maintain Current IP” can be selected. If selected, the IP address
will keep unchanged after restoring factory default settings. If not
selected, the IP will be restored to the default IP address of
192.168.1.100. Click the button “Factory Reset” to pop up the
following interface:
Fig. 4-10 “Maintain Current IP” Selected
Fig. 4-11 “Maintain Current IP” Not Selected
Click “Yes” to reset all the system settings. Factory resetting may
take about 90 seconds. After successful resetting, it automatically
goes to a new webpage. If the IP is unchanged, you can enter the
webpage directly. If it is reset to 192.168.1.100, you may be unable
to enter the webpage. Then, you have to set the host IP to 192.168.1
IP segment, like 192.168.1.25. After setting, you can enter the
webpage and modify and save the IP of PTZ camera and then the
host IP will be restored to the relevant IP segment.
Note:
1.
The operation of online resetting should be performed under
qualified personnel’s guide.
2.
The default IP address and subnet mask are 192.168.1.100 and
255.255.255.0.
3.
Do not power off during reset, or else the reset will fail.
Reboot
Click “Reboot” to pop up the following interface:
Fig. 4-12
Click OK to restart the system which may take about 90 seconds.
Then, it goes to a new webpage.
Fig. 4-13
Note:
Available only for the super user.
4.3 Network Settings
Click “Network” in the navigation bar, and the following interface
will display:
Fig. 4-14 Network Settings
11 options tabs are available: Network, FTP, SMTP, HTTPS,
802.1X, QOS, IGMP, SIP, MDA, DDNS and UPnP.
4.3.1 Network Settings
IP mode: support both IPv4 and IPv6 modes. Network parameters
are slightly different under different IP modes.
Summary of Contents for V1492MR-18TH
Page 30: ...26 ...
