Infinium OMEGA12, User Manual, Page: 25 / 181

User’s Manual for Omega 12Patient Monitor
20
Select “ Temp Unit ” and toggle between [ ºC ] and [ ºF ]. the default setting is ºC .
6) Weight/HeightUnit
Select “ Weight/HeightUnit ” to set Weight/Height Unit and toggle between kg/cm and
lb/inch
. The default setting is
kg/cm
.
7) EtCO2 Unit
Select “ EtCO2 Unit ” to set EtCO2 Unit and toggle between mmHg , kPa and %. The
default setting is mmHg .
8) Date
Select “ Date ” to set system date and time.
CAUTION

Changing date and time will affect the storage of trends and events and may causedata
missing.
9) TimeDisplayFormat
Select “
TimeDisplayFormat
” drop-down menu and toggle between [
24h
] and [
12h
],
The default setting is [
12h
].
10) AnimationSetup
Select “ AnimationSetup ” drop-down menu and toggle between ON and OFF , the
default setting is OFF .
11) Demo
Enter password to turn ON/OFF the demo.
12) Maintain
Select “ Maintain ”

Enter the corresponding key to request for manufacturer
maintenance.
13) NetworkSetup
Select “ Network Setup ”

Configure the wired/wireless connection.
14) DefaultConfiguration
Select “
DefaultConfiguration
”

Configurations of this monitor will be restored to
factory default setting.
15) About
Select “ About ”

Enter the basic information window of device and software, you can
also upgrade software in this window, as shown in Figure 4-2.