User’s Manual for Omega 12Patient Monitor
18
4.
Check that the patient settings such as [Alarm limit.], [Patient Cat.], [Paced], etc., are
appropriate for your patient. Change setting according to your need for measurements.
5.
Start Monitoring. Refer to the appropriate measurement section for details of how to
perform the measurements you require.
3.5 Stopping Monitoring or Turning Off the Power
To stop monitoring patient on a certain parameter:
1.
Remove sensors from patient, and disconnect the patient cable from the sensor and
module connector.
2.
Do not reuse single-use disposable accessories.
If you want to turn off the monitor:
1.
Confirm that the patient monitoring is finished.
2.
Disconnect the patient cables and sensors from the patient monitor.
3.
Press and hold the power
ON/OFF
button for above 3 seconds and confirm the
operation in pop-up shut-down window.
You can unplug the monitor to cut off connection from AC power.
CAUTION
Although not recommended, you can press and hold the power
ON/OFF
button for 10
seconds to force shutdown if needed. However, this may cause data loss.
3.6Using the Touchscreen
Select screen items by pressing them directly on the patient monitor’s screen. You can access
nearly all the functions by tapping directly on the screen, and almost every element on the screen
is interactive, including parameter measurements, waveforms, soft keys, message areas, alarm
areas, menus, etc. Information can be input using the touchscreen.
CAUTION
Check the touchscreen for any possible damage before use. If it is broken, please to stop
using the monitor immediately and contact your service personnel.
If any sign of screen detachment occurs, please stop using the monitor immediately and
contact service personnel.