User’s Manual for Omega 12Patient Monitor
12
Reset the alarm system
3)
Freeze
: Freeze or unfreeze the waveform display
4)
: Start or stop the printing procedure.
5)
Start/Stop
: Start/Stop measuring the non-invasive blood pressure
6)
View Layout
:
Set up the waveform in main display and parameter display layout.
7)
Main Menu
: Configure the system parameter.
8)
Pause Display
: Pause the monitor and close the monitor display
2.6.3 System Status Bar
System status bar is on the upper right and on the lower right, as
illustrated in the right Figure.
1)
Current time: shown time format of either 24h or 12h.
2)
Network status: display current network status
（
No connection,
wired connection and wireless connection
）
and network signal
strength.
3)
Battery status and battery level display: not installed, in charge, failure, work correctly
and battery level.
4)
Speaker volume: adjust the speaker volume in general setting.
2.6.4 Extended Soft Keys Area:
Click the
Extended Soft Keys Area
at the bottom of the display
, the following
Extended Soft Keys Area
as illustrated in Figure3-4 will pop up.
Figure 3-4: Extended Soft Keys Area
1)
ViewBed
: Check other patients in network.
2)
C.O.Measure
: Enter C.O. window.
3)
OxyCRG
: Enter OxyCRGwindow.
4)
BISTrend
: Enter BISTrend window.
5)
History Review
: Enter History Review window.
6)
Trend Review
: View the physiological trend data in graphic trend or tabular trend view.
7)
Pharmacy Calculator
: Calculate drug concentration.
8)
Alarm Setup
: Set alarm properties for all parameters and set general alarm limits
9)
Config Manage
:
Import/Export or save user configuration.