FY operation manual
- 39 -
Setup voltage value
：
There is a Calibrated Voltage for each head from manufacture. The value is gauged under standard
surrounding. However, the voltage is difference between standard and actual working surrounding. Usually,
you need setup a voltage lower (10% - 15%) than a calibrated voltage for better printing quality. For
example, if Calibrated Voltage is 100V, you may setup voltage value between 85V and 90V.
If a voltage is higher than the Calibrated Voltage, there are spots and out of ink easily when printing; if
a voltage is too low, the line is not straight and ink is less than regular amount when printing. Try to find an
ideal voltage by the adjustments. There are two ways to do the adjustment:
•
Adjust voltage for each print head individually
•
Or adjust voltages for all print heads by adjusting voltage coefficient or additional voltage. To
increase voltage, select voltage coefficient > 1, vice versa. If additional voltage > 0, increase
voltage; if additional voltage < 0, decrease voltage. There is 0.5V difference when increasing or
decreasing 1 for the additional voltage.
Warning
：
For regular user, please Do Not change value of voltage, otherwise, printing quality
will not be guaranteed.
10.3 RIP Operation
Please refer to “RIP User’s Manual” for detail. Close the Try first, then open RIP program.
1
、
Click Feiyeung RIP icon
to open program
2
、
Registration of the RIP
Select “ Registry” from menu of Help, a dialog box pops up:
Figure 10-3-1 Dialog box for registration
Fill out registration number, which saved on CD directory “registration number”. It is case sensitive.
Note
：
register at the first time only.
3
、
Create new file
4
、
Import image
5
、
Adjust size, position for the image
6
、
