FY operation manual
- 29 -
Chapter 9
HEATING SYSTEM
9.1 Summary
This heating system can adjust its temperature based on different PVC material and surrounding. It can
adjust the temperature automatically to match a setting temperature. Customer can have satisfied
printing effect.
9.2 System Diagram
Figure 9-1 System Diagram for Heating System
9.3 Function Description
1
、
It can control the two front and back lines’ heating board auto constant temperature at same time.
2
、
With advance protective functions for over heating, short circuit, etc. The line will shut down
automatically if a certain line’s temperature is over 75
°
C. After the temperature cool down, it will
resume. Over heating will not happen even if the entire input signal turned off.
3
、
The system can work independently and can be easily transportable. It is easy to convert input
voltage from AC110V to 220V.
4
、
Based on different medial and surrounding, customers can easily adjust temperature by the
function key F5 on the operation board.
5
、
The heating system is controlled by advanced intelligent microprocessor; it has characters of
heating up quickly, temperature controlled accurately and saving energy.
SCM
Heating signal 2
Light 2
Heat-control board
Heating
Driver
110V or 220V
Light 1
Heating
Driver Heating signal 1
Temperature adjust switch
Back heater
Front heater
Heating driver temperature signal
Temperature adjust switch
Control Board
Operation Board
DIP1:
Temperature setting
