1
Introduction
This document describes the features and hardware details of the XMC4700/XMC4800 Relax Kit Series-V1
equipped with an ARM
®
Cortex
®
-M4 based XMC
™
microcontroller from Infineon Technologies AG.
It can be used with a wide range of development tools including Infineon’s free of charge Eclipse based IDE
DAVE. The XMC4700/XMC4800 Relax Kit Series-V1 are designed to evaluate the capabilities of the XMC4700/
XMC4800 Microcontroller.
shows its specification.
Table 1
Kit Specification
Processor
Infineon’s ARM
®
Cortex
®
-M4 XMC4700 or XMC4800 microcontroller
in LQFP144 package (order number XMC4700-F144K2048 or XMC4800-
F144K2048)
Flash Memory
2048 kB
Data Memory
352 kB
Dimensions
66 x 99 mm (66 x 101 mm with connectors)
Clock Crystals
•
12 MHz and 32.768 kHz crystal for CPU
•
25 MHz crystal for Ethernet Phy
Power
•
5 V external powering
•
Micro-AB USB Connector interface or
•
On-Board Debugger USB interface
Connectors
•
Arduino compatible connectors
•
All relevant XMC
™
pins available on expansion pads (X1, X2)
•
All EtherCAT signals available on expansion pads (X1, X2)
•
Ethernet interface via RJ45 jac
•
microUSB
•
microSD-Card slot
•
Serial Wire Debug interface (2x5, 50 mil pitch) to XMC
™
(on board debugger can be overridden by externally connected
debugger)
Debugger
On-Board J-Link Debug Probe via USB supporting
•
Serial Wire Debug (SWD)
•
UART-to-USB bridge (virtual COM)
Others
•
On-board debug probe, based on XMC4200 microcontroller
•
Ethernet Phy
•
CAN transceiver
•
32 Mbit Quad-SPI Flash Memory
•
2 user push-buttons, 2 user LEDs
•
Reset push-button
The XMC4700/XMC4800 Relax Kit Series-V1 are available in four different assembly versions differentiating in
features:
•
XMC4700 Relax Lite
•
XMC4700 Relax for 5V Shields
restricted - NDA required!
Evaluation Board for XMC4000 Family
XMC4700/XMC4800 Relax Kit Series-V1
1 Introduction
Board User Manual
3
Rev. 1.4
2022-06-20
