Infineon XMC4700, Manual

Page: 15 / 28

2.11 Boot Option
During power-on-reset the XMC4700/XMC4800 latches the signal level at the pins TMS and TCK. Based on the
logic levels latched at these pins after reset the XMC4700/XMC4800 starts booting in different modes. TMS
and TCK pins are used for debugging and by default program execution is always starting from on-chip flash
(normal mode).
The XMC4700/XMC4800 Relax Kit Series-V1 does not support the selection of the boot options by switches
directly. In case of no external debug probe is used the boot mode can be influenced by applying 1 kOhm
pull-up- or pull-down resistors to TMS and TCK pins. These pins are available at the 10-pin debug connector
X102.
Table 11 Boot Mode Selection with external Pull Resistors
Logic Level at TMS during
Reset
Logic Level at TCK during
Reset
Boot Mode
High Low Normal Mode (boot from on-chip flash) (DEFAULT)
Low Low ASC BSL Mode (boot from UART)
High High BMI Customized Boot Mode
Low High CAN BSL Mode (boot from CAN)
3 Production Data
This chapter covers schematics, board dimensions, component placement and the list of material.
3.1 Schematics
In the following figures shows the schematics of the XMC4700/XMC4800 Relax Kit Series-V1 and the XMC
™
EtherCAT Phy Board-V1:
•
Figure 9 : Relax Kit Schematic: MCU, Push Buttons, LEDs, Reset Button, Crystals, USB
• Figure 10 : Relax Kit Schematic: OBD Probe, Ethernet, Quad-SPI Memory, microSD Card Slo
• Figure 11 : Relax Kit Schematic: Pin Header, Voltage Level Shifter, Power Supply, CAN transceiver
• Figure 12 : XMC
™
EtherCAT Phy Board Schematic: Input and Output Phy
• Figure 13 : XMC
™
EtherCAT Phy Board Schematic: Power, Connectors, LEDs
• Figure 14 : XMC ™ EtherCAT Phy Board Schematic: Input and Output Phy (see Revision 1.3)
• Figure 15 : XMC
™
EtherCAT Phy Board Schematic: Power, Connectors, LEDs (see Revision 1.3)
• Figure 16 : XMC
™
EtherCAT Phy Board Schematic: Input and Output Phy (see Revision 1.4)
• Figure 17 : XMC
™
EtherCAT Phy Board Schematic: Power, Connectors, LEDs (see Revision 1.4)
restricted - NDA required!
Evaluation Board for XMC4000 Family
XMC4700/XMC4800 Relax Kit Series-V1
3 Production Data
Board User Manual 15 Rev. 1.4
2022-06-20