CY8CKIT-147 PSoC® 4100PS Prototyping Kit Guide, Doc. #: 002-18734 Rev. *D
35
A.2.5
Header Connections
The PSoC 4100PS Prototyping kit supports a number of unpopulated headers on both the KitProg2
and the target PSoC 4100PS boards.
A.2.5.1
Functionality of the J1 and J2 Headers (Target Board)
The target PSoC 4100PS board contains two single-inline headers (J1 and J2). These headers are
both 1×23-pin headers and include all of the I/Os available on the PSoC 4100PS device. These
headers support all of the available ports, GND, VDDD, VDDA, and connections to passive elements
and user-input devices.
The J1 and J2 headers support 100-mil spacing, so you can solder connectors to connect the target
board to a development breadboard.
Figure A-5. J1 and J2 Headers
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
