CY8CKIT-147 PSoC® 4100PS Prototyping Kit Guide, Doc. #: 002-18734 Rev. *D
26
Code Examples
5. Connect the PSoC 4100PS Prototyping kit to the PC using the KitProg2 PCB finger connector, J8
as described in
Programming Using PSoC Creator chapter on page 21
to program the kit with
this code example. If this is the first time the kit is connected to the PC, you should wait for driver
installation to complete before proceeding with the next step.
6. Choose
Debug
>
Program
in PSoC Creator as shown in
Figure 4-3
.
Figure 4-3. Program Device in PSoC Creator
7. If the device is already acquired, programming will complete automatically and the result will
appear in the PSoC Creator status bar at the bottom left side of the screen. If the device is yet to
be acquired, the Select Debug Target window will appear. Select
KitProg2/<serial number>
and
click the
Port Acquire
button, as shown in
Figure 4-4
.
Figure 4-4. Port Acquire
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
