Inficon HLD6000, Installation Manual

Page: 40 / 76

40
6 Operation
Tr
an
sl
ation
o
f the
o
rig
in
al
operatin
g
in
str
u
ct
io
ns
HLD
6000
, k
ina4
3
e1-
a
, 140
8
6.3.10.3 Changing parameter access levels
You are logged in as a "supervisor" .
1 Select “ > Parameter > Parameter Access Level".

A list of all parameters is shown including the assignments to "supervisor" and "opera-
tor".
2 To change a parameter assignment in the list illustrated, press on an entry when logged
in as "supervisor".

Pressing on an entry changes the shown assignment between "supervisor" and "oper-
ator".
3 To reject the change, press on or to confirm, press on .
With regards to the factory settings, see also Table 4 on page 20.
6.3.11 Save parameters
You can be logged in as a "supervisor" or as an "operator" . Regardless of access
rights, you can select parameters and save them on a USB stick.
1 Connect a USB stick with the USB port on the device.
2 Select “ > Parameter > Save".
3 Either select all parameters or just individual parameters.
4 Confirm your selection using .
If necessary, the saved parameters can be transferred back to the device, see "6.3.12 Load
parameters", page 40 .
6.3.12 Load parameters
As "supervisor" you can transfer all parameters belonging to the selected parameter file
from the USB stick onto the device.
If you are logged in as an "operator" then only those parameters which you are autho-
rized to access are transferred from the selected parameter file to the device.
1 Connect a USB stick with the USB port on the device.
2 Select “ > Parameter > Load".
3 Select a parameter file.
4 Confirm with .