23
Installing Base Using Flexible ISOFIX Lower Anchorage Connectors (LAC)
ISOFIX Compatible Restraint
Infant Seat
Step 1:
Step 2:
Step 3:
Step 4:
Locate the ISOFIX and Top Tether anchorage point.
Place the Base in that seating position (refer Figure 1)
and unfold the ISOFIX compartment cover.
Pull out the flexible ISOFIX Lower Anchorage
Connector (LAC) straps (refer Figure 2) and fully
lengthen the flexible LAC straps.
Feed the LAC straps through the base (refer Figure 3)
and insert the flexible LAC straps into the ISOFIX lower
anchorage point. You may need to ‘PUSH’ into the
seat bite where the ISOFIX symbols indicate. Give a
‘PULL’ to check for positive engagement (refer Figure 4).
NOTE:
It may be easier to use the lengthened LAC straps, and
move the Base away from the seat back to give better
access to the ISOFIX anchors (refer Page 24).
Figure 1
Figure 2
Figure 3
Figure 4
PUSH
IMPORTANT
!
• Consult the car owner’s handbook for the location of the ISOFIX anchorages
• Consult the car owner’s handbook for the location of the top tether anchorage points.
If there is no child restraint anchor fitting or child restraint anchor point refer to Page
46-47 for the installation of the anchor fitting.
