35
Rotate the Carry Handle towards the vehicle seat
back and place the carry handle in the ‘TRAVEL’
position (refer Figure 4).
Take the elastic section of the Hood, at the back of
the Infant Carrier, and fold to expose the Loop Tether
Strap contained in the storage pocket (refer Figure 4
& 5).
Extend the Loop Tether forward under the Hood
(refer Figure 6). Ensure the Top Tether Strap is
clipped in the guides.
Step 4:
Step 5:
Step 6:
TETHER
GUIDE
Placing Infant Carrier into Base
Use
Infant Seat
Figure 4
PULL
Figure 5
Figure 6
WARNING
!
Always use a lap or lap-sash seat belt
and top tether strap to attach the child
restraint to the vehicle.
Do not use the restraint without the top
tether strap correctly attached and
adjusted.
Do not use on any vehicle seat which
faces sideways or rearwards.
IF AN AIRBAG IS FITTED IN THE
SEATING POSITION WHERE THE
CHILD RESTRAINT IS TO BE FITTED,
FOLLOW THE VEHICLE
MANUFACTURER’S WARNINGS
AND INSTRUCTIONS.
Do not use the restraint if the buckle
is sluggish or does not provide an
audible “Click” refer to Cleaning
Instructions on page 43.
