26
Step 3:
Infant Carrier
Adjusting Shoulder Strap Height
Setup
Infant Seat
HARNESS
STRAPS
METAL
SPREADER
PLATE
Figure 4
PULL
Pull the harness shoulder straps through the
shoulder slot holes in the seat shell and cover.
They should now be loose in the front of the seat
(refer Figure 4).
HARNESS
STRAPS
METAL
SPREADER
PLATE
GATES
Figure 3
NOTE: A new born or very small infant will
require the installation and use of the infant
insert and pillow to ensure correct fitment.
Push the ends of the harness shoulder straps
through the appropriate shoulder slot holes in the
cover and seat shell for the child’s correct shoulder
height (refer Figure 5)
HARNESS
STRAPS
METAL
SPREADER
PLATE
Figure 5
Step 4:
The shoulder straps must be in the slots which
are nearest to the infant’s shoulders, but not
lower than the infants shoulders.
IMPORTANT
!
