Inepro PayCon II, Technical Manual

Page: 85 / 144

How To
78
How to add a product?
Enter the menu as described in the Introduction chapter of this
manual with your Administrator or Service card. Take the following
steps to add a new product:
1
The product ID (this is depending on the application), and
the short name. See 'Product Basics).
2
The product's short name, this name will be used on the
display .
3
The product's f ull name, this name will be used in Inepro
Back Of f ice sof tware and printed on receipts (both
optional).
4 The product price.
5 The product's VAT, this is not required.
6
The content v alue is used f or products like 'Time', in which
case y ou could buy 5 min. The content v alue will then be
'5' By def ault it is '1'.
7 Delete the product f rom the Pay Con.
Now the product is completely stored in the PayCon. It is always
possible to change the name, price, VAT, etc. It is not possible to
change the ID, in that case you should delete the current product
and create it again with a new ID.
Leave the menu by pressing [Stop] several times until you see
the 'Welcome Payment please' message on your display.
19