Inepro PayCon II, Technical Manual

Page: 52 / 144

Hardware
45 - PayCon II
Mifare
In this menu you can set up the connected Mifare card reader by
selected the appropriate COM port. The Mifare reader is a contact
less solution with enough memory to store data.
Option Description
COM port The COM port the card is connected to
Cardswitch Does the card need to be phy sically released at the end of the transaction?
Reader Select the Mif are chip that is use internally
LED The port the LED is powered f rom
The 'use card switch' setting should be only activated when the
Mifare card reader is mounted on a PayCompact.
ACM30
In this menu you can set up the connected ACM30 card reader by
selected the appropriate COM port. The ACM30 card reader is
needed for supporting Dutch public banking cards (Chipknip).
The ACM30 card reader uses a RS232 COM port.
If the ACM30 card reader is placed in the PayCon, the internal
card in the card readers submenu should be disabled. If the ACM30
card reader is placed in the PayCompact, the external card in the
card readers submenu should be disabled.
It is not possible to create cards in a PayCon with an ACM30
card reader.
LEGIC Advant
LEGIC Advant is a contact less high security solution