Inepro PayCon II, Technical Manual

Page: 51 / 144

Submenu's
44
Setting up the devices
To set up a device that uses serial communication you need to
assign it to a COM port. Make sure the COM port number in the
device menu corresponds with the COM port to which the device is
connected on the PayCon. If the device is not connected, the COM
port should be set to 'not available'.
Some devices need the RS232 COM port (COM port 1,2 and 3 on
the PayCon), if you want to connect it to another COM port you will
need a signal converter, contact your dealer for further details.
PayCon
In this menu you can setup the PayCon's own card reader settings.
The PayCon has an internal contact card reader and 4 SAM slots. A
external card slot may also be connected.
Option Description
Internal Use the internal card reader?
External Use the external card reader?
SAM 1-4 Use SAM n ?