Inepro PayCon II, Technical Manual

Page: 77 / 144

How To
70
Via a command card
Just put in your reload command card in normal operation mode, key
in your PIN code if required and take the following steps after the
command card is removed:
Display Instruction
Insert user card Insert a user card y ou want to reload.
Balance
The current balance is shown; press the [OK] button to continue.
Enter amount Enter the amount of money y ou want to reload.
Reloading succeeded Now y ou can remov e the reloaded card.
To reload another user card, repeat above mentioned steps.
Via the PayCon menu
Enter the menu as described the Introduction chapter of this
manual with your Administrator or Service card. Take the following
steps to reload a user card:
No. Description
1 Insert a user card y ou want to reload.
2
The current balance is shown; press the [OK]
button to continue.
3 Enter the amount of money y ou want to reload.
4 Now y ou can remov e the reloaded card.
To reload another user card, repeat above mentioned steps.
It is not possible to reload disposable chip cards. Disposable
chip cards can be loaded once only. This can be done also with the
above mentioned reload option.
19