Ref. IS.MDUINO.58+
Rev. 0: 30-08-2019
6
Intended use or of Industrial Shields products
Consider the following:
Industrial Shields products should only be used for the cases of application foreseen in
the catalogue and the associated technical documentation. If third-party products and
components are used, they must have been recommended or approved by Industrial
Shields.
The correct and safe operation of the products requires that your transport, storage,
installation, assembly, operation and maintenance have been carried out in a correct It
must respect the permissible ambient conditions. You should also follow the indications
and warnings that appear in the associated documentation.
The product / system dealt with in this documentation should only be handled or
manipulated by qualified personnel for the task entrusted and observing what is
indicated in the documentation corresponding to it, particularly the safety instructions
and warnings included in it. Due to their training and experience, qualified personnel
are in a position to recognize risks resulting from the handling or manipulation of such
products / systems and to avoid possible hazards.
Disclaimers
Weights and Dimensions
Dimensions and weights are nominal and they are not used for manufacturing
purposes, even when tolerances are shown.
Performance Data
The performance data given in this manual is provided as a guide for the user in
determining suitability and does not constitute a warranty. It may represent the result of
INDUSTRIAL SHIELDS’s test conditions, and the users most correlate it to actual
application requirements. Actual performance is subject to the INDUSTRIAL SHIELDS
Warranty and Limitations of Liability.
Change in Specifications
Product specifications and accessories may be changed at any time based on
improvements and other reasons.
It is our practice to change model numbers when features are changed, or published
ratings or when significant construction changes are made. However, some
specifications of the products may be changed without any notice. When in doubt,
special numbers may be assigned to fix or stablish key specifications for your
application on your request. Please consult with your INDUSTRIAL SHIELDS
representative at any time to confirm actual specifications of purchased products.
Summary of Contents for M-DUINO PLC ARDUINO ETHERNET 58
